How To Connect Wireless Controller To Ps3

Download Commodity

This wikiHow teaches how to connect your PS3 controller wirelessly to your PS3, as well as how to employ it on a Windows or Mac computer. It'due south also possible to use a PS3 controller with Android, though you lot'll need to root your phone or tablet to practise so. When connecting a PS3 controller to anything, it is crucial that you use a PS3 controller made by Sony; whatever third-party controllers are liable to fail or glitch out.

1

Turn on the PlayStation 3. Printing the Power button on the front of the console. When connecting a new controller, the PS3 cannot be in Standby mode.
2

Connect the controller'south charging cable to the controller. You'll find the charging port for the cable, which is a mini-USB cable, in the front of the controller'due south housing (between the triggers).

Advertisement
iii
Connect the other end of the cable to the PS3. The other end of the charging cable should plug into a USB port on the front end of the PS3.
- Depending on your PlayStation model, yous'll find either two or four USB ports hither.
4

Turn on the controller. Printing the PlayStation button in the eye of the controller. The lights on the front terminate of the controller will brainstorm blinking.
5
Wait for the controller lights to finish blinking. Once a single lite is on and not blinking, your controller is synced with the PS3.
- The light that is on indicates which controller you are using (P1, P2, etc.).
half dozen
Disconnect the USB cable from the controller. Your controller should now be continued to the PS3 wirelessly.
- Wireless functionality is only available on official Sony DualShock 3 controllers. On unofficial controllers, y'all'll need to leave the cablevision plugged in.
7

Accuse the controller if it doesn't stay on. If your controller turns off afterward unplugging it, it may be out of accuse. Keep it plugged in for a few hours with the PS3 on to accuse the battery.
8
Reset the controller if information technology nevertheless won't sync. If you nevertheless can't get your controller to sync with the PS3, you may demand to reset it. To exercise so:
- Turn over the controller and locate the Reset button. You lot can find it along the top of the backside, near the L2 button.
- Use a bent paperclip to printing and hold the Reset push. You should be able to feel it click.
- Hold the Reset push for at to the lowest degree 2 seconds, so remove the paperclip.
- Endeavor connecting and syncing the controller once again.

Advertizing

1
Make sure that you take a Sony-certified controller and charging cable. The programme that you'll use to connect your PlayStation 3 controller to your computer just works reliably with Sony DualShock 3 controllers that are continued to the figurer via a PS3 controller charging cable.
- While you may exist able to become third-party controllers to work (or Sony controllers to work wirelessly), the only reliable way of connecting a PlayStation 3 controller to your Windows reckoner is with the aforementioned Sony-certified controller and cablevision.
ii

Unplug your PlayStation three. If you accept a PS3 within range of your controller, unplug information technology from the wall to foreclose the controller from accidentally connecting to it.
3

Reset your controller. Using a bent paperclip, press the recessed Reset button that'southward on the bottom of your controller. This will preclude the controller from failing to connect due to past pairings.
4
Turn on your controller. Printing the PlayStation push button in the middle of the controller to do so. Its lights will begin blinking.
- Due to a glitch on some Windows computers, you lot'll need to turn on your controller earlier connecting it to your computer.
5

Connect your controller to your computer. Plug the small stop of the charging cable into your PS3 controller, and then plug the other stop into one of your computer's USB ports.
half-dozen
Download the SCP Toolkit. SCP Toolkit is a program that allows Windows to use a PlayStation 3 controller.
- Get to the SCP Toolkit website in a browser.
- Click ScpToolkit_Setup.exe beneath the "Assets" heading.
- Expect for the file to finish downloading.
7
Install the SCP Toolkit program. To do so:
- Double-click the setup file.
- Click Yes when prompted.
- Follow the on-screen instructions until you can click Install, then click it.
  - Y'all may take to click several different Install buttons.
- If prompted to install prerequisites, click Next until the prerequisites begin to install.
- Click Finish when prompted.
8

Open up the "SCPToolkitDriver" Installer program. Double-click this app icon on your desktop to open it.
9
Disable unwanted options. Uncheck both the "Install DualShock4 Controller" box and the "Bluetooth" box, as well equally any other options in the window that you don't desire to use.
- If you're unfamiliar with the other checked boxes not listed hither, it's best to leave them checked.
10

Click the "Choose DualShock iii Controllers to Install" box. You'll discover this on the right side of the window.
11
Check the "Wireless Controller" option. You'll see a list of all devices fastened to your computer (e.g., keyboards, mouses, webcams, etc.). Your PS3 controller is the option marked "Wireless Controller (Interface [number])" here.
- The [number] section pertains to the USB port that your controller is using.
12
Click Install . It'southward on the right side of the window. Doing so will prompt SCP Toolkit to begin installing your controller's drivers.
- Once the installation is consummate, you'll hear a confirmation racket, at which point you lot should be able to utilize your PlayStation iii controller with whatsoever uniform game.

1

Ability down and unplug your PS3. If you have a PS3 for which y'all would normally utilise your controller, plow it off and unplug information technology to prevent accidentally turning it on while you pair the controller with your Mac.
2
Reset your controller. Using a bent paperclip, press the recessed Reset push button that'south on the lesser of your controller. This will prevent the controller from running into issues left over from previous pairings.
- This step is optional, but highly recommended.
3

Open up the Apple tree menu . Click the Apple logo in the elevation-left corner of the screen. A driblet-downwardly menu will announced.
4

Click System Preferences… . It'south in the drop-down carte. This will open the System Preferences window.
five
Click Bluetooth . It's the Bluetooth icon

in the middle of the Arrangement Preferences menu.
- If yous don't see this selection, click the ⋮⋮⋮⋮ push to return to the master Arrangement Preferences menu.
6
Click Turn Bluetooth On . This button is on the left side of the page. Doing so enables your Mac's Bluetooth.
- If this button reads Plough Bluetooth Off instead, Bluetooth is already enabled.
vii
Connect the PS3 controller to your Mac. Attach the pocket-sized end of the charger cable that came with your PS3 controller to the controller's charging port, and so plug the other end into your Mac's USB port.
- If your Mac uses USB-C ports (ovals) instead of USB iii.0 ports (rectangles), yous'll need to purchase a USB three.0 to USB-C adapter for your Mac before you can exercise this. You can find them on Amazon and in tech section stores.
viii

Let the controller charge if necessary. If the controller hasn't been charged for a while, you lot may want to permit information technology charge for about 30 minutes before proceeding with setting upwards the Bluetooth connectedness.
nine

Press and concur the PlayStation button for ii seconds. It's in the eye of the controller. Doing so will prompt the lights on the top of the controller to begin flashing.
10

Unplug the controller and wait for it to sync. The PS3 controller volition appear in the list as "Connected" after a few seconds.
11

Enter 0000 as the passcode if prompted. If your Mac prompts you for the device's passcode, type 0000 and and so click Pair. This usually isn't required on newer Macs.
12

Set your controller in-game. Now that the PS3 controller is continued to your computer via Bluetooth, you tin use information technology in whatever game that supports gamepads. You may have to manually gear up the controller buttons for game functions; this varies from game to game.
thirteen

Finished.

Advert

Add New Question

Question

Will a third political party PS3 controller sync with a PC?

Yes, it will.
Question

I lost the USB to a controller without a charger port. How exercise I connect information technology to my PS3?

Press the reset and PS button for iii seconds. And accept the PS3 off for information technology to work.
Question

Can I sync my PS3 controller to my PS3 without the cable?

On the back of your controller in that location should be a modest pigsty on the upper part closer to the side that contains the D-pad. This hole contains a Reset button that tin can be depressed with any long sparse particular such every bit a fork prong or a small screwdriver. This should cause the controller to search for nearby PlayStations to sync with.

Show more answers

Advertizing

Updating your PlayStation 3 can prepare some connexion bug for your controller.
If your kickoff few attempts to connect your PlayStation 3 controller to your console or computer don't work, endeavour using a different (notwithstanding Sony) PlayStation three controller. If a different controller works, your beginning controller is probably broken.

Advertising

Connecting a PlayStation 3 controller to a Windows computer can be an unreliable process due to Microsoft'south aversion to Sony products.

Advertising

Nearly This Article

Cheers to all authors for creating a page that has been read 1,016,249 times.

Did this article help you?